Please Read Before Purchase
- All Used miners have some sign of cosmetic ware. May have metal parts corrosion, Dust and scratches.
- If you are a busy person and don’t have enough time to check and test miners, Please don’t buy used miners.
- If you have no any technical skills or if you are not willing to do repairs from yourself or someone else please don’t buy used miners. Because some times miners get damage during shipment. In this case we send spares to buyers free of charge to do all repairs.
- If you want to return the miners you have to pay return shipping chargers.
1. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
2. Power Efficiency: 0.098 W/GH ±10%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
3. Rated Voltage: 11.60 ~13.00V
4. ASIC Chip: BM1387 or Else
5. Dimensions: 350mm(L)*135mm(W)*158mm(H)
6. Cooling: 2x 12038 fans
7. Operating Temperature: 0 °C to 40 °C
8. Network Connection: Ethernet
Frequency automatically set Please note the following:
1. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
3. Power supply unit is included. Bitmain recommends the APW3, APW7 or P3